.: This Vista 64bit driver was not tested with Studio 11 and previous. Important Note: MovieBoard 500-PCI/700PCI has an issue on Windows 64 bit systems when the computer has 2GB or more system RAM. In this case Studio will crash during capture. For this reason other capture devices are recommended on most Windows 64 bit systems. NI Device Drivers provides popular NI instrument drivers you can use to control NI and third-party hardware. NI Device Drivers is a bundle that features most NI instrument drivers, including NI-DAQmx, NI-VISA, NI-SCOPE, and NI-SWITCH.
*Only compatible with Windows Vista/7/8/10 OS (Does not operate on Mac OS)
This article includes all of the software downloads. Navigate through the tabs to select the software you need, click on the red 'Click here' link to download the program of your choice.
Device Updater
OS Requirements: Windows Vista/7/8/10
*Used to download updates for GTX, BDX, X4, Livewire, ITSX
Click hereto download the Device Updater.
Make sure all devices are unplugged during the install process.
Livelink Gen-II
OS Requirements: Windows Vista/7/8/10
*Datalogging software.
Click hereto download Livelink Gen-II.
Make sure all devices are unplugged during the install process.
Advantage III
OS Requirements: Windows Vista/7/8/10
Click hereto download Advantage III.
Make sure all devices are unplugged during the install process.
Drivers
Windows 32bit drivers click here.
Windows 64bit drivers click here.
Install Instructions
If you installed the SCT device updater before you plugged the device in then this should be easy to fix.
With your device connected:
Dragonchip USB Devices Driver Download
Open your computers Device Manager.
Look for a device that is not installed like one with a yellow exclamation mark. (Here is a screenshot of what you are looking for.)
If you see this, right click it and select update driver.
A new window should open up and give you the option to either automatically search, or browse for files.
Click browse for files
Navigate to the folder you downloaded, and select “Open”.
If you did this correctly, it’ll tell you your drivers have successfully been updated and once you click “OK” you should see something similar to the picture below.
Now your communication should work between the device and the computer. With most devices, you will want to unplug it and plug it back in and restart the device updater. Then click “Display Device Settings and Serial” and if the serial number shows up, it is communicating.
Update Agent for GT's
Dragonchip Usb Devices Driver Download Free
Dragonchip Usb Devices Driver Download Windows 7
How do I update my Bully Dog GT Tuner?
Basic Steps to Update a GT Tuner
1. Run the Update Agent.
2. Connect the Micro SD card to your computer.
3. Choose the vehicle application and let the Agent search.
4. Click the Update button.
5. When the Update is finished, put the Micro SD card in the GT.
6. Update the GT Platinum from the SD card by choosing Update GT Software, or Update GT Firmware on the Main Menu. (option will be all the way at the bottom of the main menu.)
Detailed Steps to Update a GT Tuner
Where do I Find the Bully Dog Light Duty Update Agent for a Bully Dog Gauge GT Tuner?
To install the Bully Dog Light Duty Update Agent please open the following link. Then open and run the file.
- Open the update agent. Note: the tune will need to be uninstalled from your vehicle to update. You can check the vehicle is stock by going to show settings, the status will read “installed” or “not installed”
- Connect the SD with either the card reader or the GT itself and the USB cable
- Highlight the card in the update agent, and select “select device”
4. Select your device (40417, 40420, etc.) then select “download and upgrade”
5. Wait for the download to finish, you will see this message.
6. Select ok, then with the sd card in the device, go to change vehicle at the top of the menu, if it is the first time updating, and select your vehicle. Or go to update software at the bottom of the main menu to update with the latest files.
In Internet Explorer, click Tools, and then click Internet Options. On the Security tab, click the Trusted Sites icon. Click Sites and then add these website addresses one at a time to the list: You can only add one address at a time and you must click Add after each one. The CP210x Manufacturing DLL and Runtime DLL have been updated and must be used with v 6.0 and later of the CP210x Windows VCP Driver. Application Note Software downloads affected are AN144SW.zip, AN205SW.zip and AN223SW.zip. If you are using a 5.x driver and need support you can download Legacy OS Software. Elite Silicon Driver Download for Windows 10. Download: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10: 15.0126.0058: Generic driver software for E2868 and E3868. Supports both 32 bit and 64 bit systems.Change Log: 2015/01/28: Download: Windows XP, Windows Vista, Windows 7, Windows 8 and Windows 8.1: 13.1112.0057: Generic driver software for E2868 and E3868. Download Corsair VOID ELITE Surround Headset Driver/Utility 3.37.140 (Sound Card). DOWNLOAD Corsair VOID ELITE Surround Headset Driver/Utility 3.37.140. COMPATIBLE WITH: Windows 7 Windows 7 64 bit Windows 8 Windows 8 64 bit Windows 8.1 Windows 8.1 64 bit Windows 10 Windows. Below are the Windows device drivers for the ELITE USB hardware as well as the Wibu key. Windows Device Driver: Supported Operating System: ELITE USB Hardware: Download Now! Windows XP, Windows Vista, Windows 7 (32/64 bit) Wibu Key: Download Now!
How do I update my Bully Dog GT Tuner?
Basic Steps to Update a GT Tuner
1. Run the Update Agent.
2. Connect the Micro SD card to your computer.
3. Choose the vehicle application and let the Agent search.
4. Click the Update button.
5. When the Update is finished, put the Micro SD card in the GT.
6. Update the GT Platinum from the SD card by choosing Update GT Software, or Update GT Firmware on the Main Menu. (option will be all the way at the bottom of the main menu.)
Detailed Steps to Update a GT Tuner
Where do I Find the Bully Dog Light Duty Update Agent for a Bully Dog Gauge GT Tuner?
To install the Bully Dog Light Duty Update Agent please open the following link. Then open and run the file.
- Open the update agent. Note: the tune will need to be uninstalled from your vehicle to update. You can check the vehicle is stock by going to show settings, the status will read “installed” or “not installed”
- Connect the SD with either the card reader or the GT itself and the USB cable
- Highlight the card in the update agent, and select “select device”
4. Select your device (40417, 40420, etc.) then select “download and upgrade”
5. Wait for the download to finish, you will see this message.
6. Select ok, then with the sd card in the device, go to change vehicle at the top of the menu, if it is the first time updating, and select your vehicle. Or go to update software at the bottom of the main menu to update with the latest files.
In Internet Explorer, click Tools, and then click Internet Options. On the Security tab, click the Trusted Sites icon. Click Sites and then add these website addresses one at a time to the list: You can only add one address at a time and you must click Add after each one. The CP210x Manufacturing DLL and Runtime DLL have been updated and must be used with v 6.0 and later of the CP210x Windows VCP Driver. Application Note Software downloads affected are AN144SW.zip, AN205SW.zip and AN223SW.zip. If you are using a 5.x driver and need support you can download Legacy OS Software. Elite Silicon Driver Download for Windows 10. Download: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10: 15.0126.0058: Generic driver software for E2868 and E3868. Supports both 32 bit and 64 bit systems.Change Log: 2015/01/28: Download: Windows XP, Windows Vista, Windows 7, Windows 8 and Windows 8.1: 13.1112.0057: Generic driver software for E2868 and E3868. Download Corsair VOID ELITE Surround Headset Driver/Utility 3.37.140 (Sound Card). DOWNLOAD Corsair VOID ELITE Surround Headset Driver/Utility 3.37.140. COMPATIBLE WITH: Windows 7 Windows 7 64 bit Windows 8 Windows 8 64 bit Windows 8.1 Windows 8.1 64 bit Windows 10 Windows. Below are the Windows device drivers for the ELITE USB hardware as well as the Wibu key. Windows Device Driver: Supported Operating System: ELITE USB Hardware: Download Now! Windows XP, Windows Vista, Windows 7 (32/64 bit) Wibu Key: Download Now!
Dragonchip Usb Devices Driver Download Software
Dragonchip Usb Devices Driver Download Windows 10